PS-1206UWg
Wireless 802.11b/g USB Print Server
  • Complies with wireless 802.11b/g standards
  • Includes multilingual EZmax Setup Wizard
  • Shares one USB printer among the network users
  • Supports TCP/IP, IPX/SPX, NetBEUI and Apple Talk protocols
  • Supports LPR, IPP, SMB/TCP and RAW printing protocol
  • Supports DHCP Server and Client protocols
  • Supports Auto MDI/MDI-X
  • Compatible with Windows 2000/XP/Vista, MAC OS 10.4.x and above
Overview

Complies with wireless 802.11g/b standards
With the wireless 802.11g/b technology, the transmission data rate of  PS-1206UWg can be up to 540Mbps, it allows  stronger wireless signal and guarantee high speed wireless connections compared to a standard wireless 802.11b/g network.

Support different Printing Methods
The PS-1206UWg print server supports a wide selection of printing protocols such as LPR, IPP and RAW printing. They can also work with different network protocols like TCP/IP. This gives you a variety of printing methods to choose based on your requirements.

Fault-Tolerant Firmware Upgrades
You do not need not worry about an error occur while the firmware is being upgraded. The PS-1206UWg  server incorporates a fault-tolerant upgrade function that guarantee 100 percent firmware upgrade success.

User-friendly Setup Wizard and Driver CD*
To facilitate connection to your printer, the PS-1206UWg print server bundled with a user-friendly EZmax setup wizard CD. Its easy-to-use windows installation wizard simplifies and enhances the installation procedures, you can set it up within a minute. Once you have installed the print server, you can access and configure the print server via the web browser from any computers which is within the network.
Specifications
HARDWARE INTERFACE
CPU / MEMORY
POWER ADAPTER
  • Wireless 802.11b/g
  • One USB port
  • One 10/100Mbps LAN port
  • Reset button
  • One 2dBi antenna
  • 1MB NOR Flash
  • 8MB SDRAM
  • 5VDC / 1A
INSTALLATION & MANAGEMENT KITS
SECURITY
LED
  • Multilingual EZmax Setup Wizard
  • Admin Utility included
  • Web-based Management
  • Firmware upgrade utility
  • 64/128-bit WEP Encryption and WPA-PSK,  WPA2-PSK security
  • WLAN
  • STATUS
  • LAN
SYSTEM  REQUIREMENTS
OS
HUMIDITY & TEMPERATURE
  • CPU: Pentium III 1G above or similar
  • Memory size: 256MB RAM
  • One CD-ROM drive
  • Hard Disk: Min. of 100MB disk space
  • USB Printer
  • Wireless 802.11b/g/n or Fast Ethernet network
  • Print Server : Windows 2000/XP/2003  /Vista/7, Mac 9.x above and Linux/Unix  
  • 10-90%(Non-condensing)
  • 0 o C ~40 o C
DIMENSION
OUTPUT POWER
CERTIFICATIONS
  • 62 (W) x  22 (H) x 77 (D) mm ( without Antenna)
  •  16-18dBm
  • CE, FCC

Download Area
 Datasheet  Quick Install Guide  Driver  FAQ
 Compatibility  Product Images  Manual  Firmware
 Linux Source Code  CE DoC