EW-7303HPn v2.0
N150 High Power Outdoor Wireless Access Point/Range Extender with Built-in 12dBi Antenna
  • Complies with wireless 802.11b/g/n standards
  • Built-in 12dBi antenna (transmission range over 5km*)
  • 600mW high power output
  • Wireless data rates up to 150Mbps
  • Supports AP mode, WDS mode, WDS with AP mode, and repeater mode
  • Supports WEP, WPA, WPA2, and IEEE 802.1x encryption
Overview

High Power Output for Enhanced Coverage and Signal Strength
The Edimax EW-7303HPn V2 is a high power outdoor range extender/access point that complies with wireless 802.11b/g/n standards. Its high power design boots its wireless output power to 600mW, enabling it to cover a distance of over 5 kilometers*. The combination of cost-effectiveness and outstanding wireless performance make the EW-7303HPn V2 the best choice for long distance wireless connectivity.

12dBi High-Gain Antenna
The outstanding high power performance of the EW-7303HPn V2 is complimented by a built-in 12dBi directional panel antenna. This high-gain antenna not only increases the transmission distance, but also stabilizes the wireless signal for superb wireless performance. Additionally, the EW-7303HPn V2 is designed with an SMA connector that enables the user to connect external antennas to this access point. Users can boost the transmission distance even further with a high dBi antenna or set up a Wi-Fi central station with an omni-directional antenna.

Multiple Operation Modes
The Edimax EW-7303HPn V2 can be configured to operate in four modes: AP mode, WDS mode, WDS with AP mode, and repeater mode. With multiple operation modes, the EW-7303HPn V2 is a versatile solution perfect for a wide range of wireless applications.

Wireless 802.11n Standard (Data Rates up to 150Mbps)
The Edimax EW-7303HPn V2 is a high-speed solution that complies with IEEE 802.11b/g/n standards. The latest wireless technology is built into this access point to broaden its wireless coverage and to reduce dead spots within the wireless range. When it is connected to wireless 802.11n compatible devices, the EW-7303HPn V2 can achieve transmission rates of up to 150Mbps.

Features

  • Complies with the IEEE 802.11b/g/n standards.
  • Supports 2.400~2.4835GHz frequency band.
  • High data rate up to 1500Mbps network speed.
  • Auto rate fallback in case of obstacles or interferences.
  • Supports WDS (Wireless Distributed System) repeater mode.
  • Supports AP Client mode.
  • Supports WPS (Wi-Fi Protected Setup)
  • Provides 64/128 bit key length WEP data encryption.
  • Supports WPA, WPA2 security enhanced function (pre-shared key, 802.1x, TKIP, AES …).
  • Features LNA (Low Noise Amplifier).
  • Supports gateway, bridge and WISP operation modes.
  • Supports VPN pass-through for PPTP, IPsec, and L2TP connections 
  • Supports Web-based configuration.
  • Firmware upgradeable via Web browser.
Specifications
ANTENNA
LAN PORT
POWER ADAPTER
  • Internal: 12dBi directional panel antenna
  • External (optional): SMA connector
  • 10/100M Passive PoE Port x 1
  • 12VDC, 1A
OUTPUT POWER
INSTALLATION
MEMORY
  • 11n:22dBm ± 1dBm, -89dBm
  • 11g:26dBm ± 1dBm, -91dBm
  • 11b:27dBm ± 1dBm, -93dBm
  • Quick installation Guide
  • 4 MB Flash
  • 32 MB SDRAM
HUMIDITY & TEMPERATURE
DIMENSION
CERTIFICATIONS
  • Max. 10~90% (Non Condensing)
  • -20 ~70°C
  • 225(H) x 77(W) x 59(D) mm
  • FCC
Download Area
 Datasheet  Quick Install Guide  Driver  FAQ
 Compatibility  Product Images  Manual  Firmware
 GPL Source Code  CE DoC utility Utility