EW-7228APn
150Mbps Wireless 802.11 b/g/n Range Extender / Access Point with 5-Port switch
  • Complies with IEEE802.11b/g and compatible with IEEE802.11n wireless standards
  • Increases the wireless speed up to 6 times faster and extends the coverage 3 times further
  • Provides EZmax wizard to simplify network setup process
  • Supports point-to-point and point-to-multi point bridge function
  • Supports WDS mode, Universal Repeater mode and AP client mode
  • Supports WPA, WPA2 enhanced security function and WPS configuration button
  • Supports Green WLAN to reduce power consumption by distance and CPU offload when wireless is idle
Overview

Wireless 802.11n Range Extender / Access Point
Acting as a bridge between the wired Ethernet and the 2.4GHz wireless IEEE 802.11b/g/n, this wireless access point let your wireless client stations access both the wired and the wireless network nodes.

Universal Repeater Mode
The Universal Repeater function could extend the coverage and signal strength for the current wireless environment. This standardized function is compatible with other wireless APs and Routers. Users can use this feature to build up a large wireless network in a huge space like airports, hotels and schools, etc.

Robust Wireless Security with WPA and WPA2
Except for the basic security control by ESSID and 64/128 bit key length WEP encryption, this access point also supports the advanced security features, like MAC access control, IEEE 802.1x authentication, TKIP, AES  and hidden ESSID. It provides a total solution for you to build up a secure wireless network environment that can prevent from all kinds of hacker intrusion.

Web Configuration
You can configure this access point through the friendly Web user interface with a browser.

Support Green WLAN
The EW-7228APn has adapted a clever protocol in smart transmission power control. When the wireless is idle, the Range Extender/Access Point smartly adjusts transmission output by distance and CPU offload to reduce power consumption 26%~39% comparing the power consumption under data is transmitted.

Multi-languages Setup Wizard
An unique Multi-languages Setup Wizard is provided in the bundled CD. You only need to make sure the access point is properly connected to the network without specifying your PC’s IP address before starting the configuration. The EZmax Wizard will detect your Range Extender/Access Point automatically and guide you to follow a few simple steps to complete the settings within minutes.
Specifications
HARDWARE INTERFACE
MANAGEMENT
OUTPUT POWER
  • 1 x Detachable 3dBi Dipole Antenna
  • 5 x Fast Ethernet LAN Port
  • Reset/WPS button
  • LED indicators: Power, WLAN, WAN
  • HTTP/TFTP Firmware Upgrade
  • Supports Web-based configuration
  • 11n: 14±1.5dBm,
    11g: 15±1.5dBm
    11b:17±1.5dBm
FUNCTION
SECURITY
FREQUENCY & MODULATION
  • Provide MAC address control
  • Supports 4 SSIDs
  • Auto rate fallback in case of obstacles or interferences
  • Supports point-to-point and point-to-multi point bridge function
  • Supports WDS (Wireless Distributed System) repeater mode
  • Supports Universal Repeater mode
  • Supports AP Client mode
  • Supports WPS hardware button for easy wireless association
  • Support Green WLAN for smart Tx power saving, Implicit Rx
  • power saving and CPU offload
  • 64/128-bit WEP Encryption and WPA-PSK, WPA2-PSK security
  • Supports Radius server authorization function
  • Supports DHCP Server/Client
  • 2400~2484MHz
  • 802.11b: CCK, DQPSK, DBPSK
  • 802.11g: 64QAM, 16QAM, QPSK, BPSK, DSSS
  • 802.11n: 64QAM, 16QAM, QPSK, BPSK
MEMORY
HUMIDITY
TEMPERATURE
  • 2 MB Flash
  • 16 MB SDRAM
  • Operating 10-90%
    (Non-condensing)
    Storage: Max. 95%
    (Non-condensing)
  • Operating 0~40 degree Celsius
    Storage: -20~60 degree Celsiu
POWER ADAPTOR
DIMENSION
CERTIFICATIONS
  • DC 5V, 0.6A
  • 26(H) x 136(W) x 90(D) mm
  • CE, FCC

EXAMPLE OF EW-7228APn SETUP:
  • Convert wired netword to wireless network: Connect EW-7228APn to a wired network's devices such as ADSL modem, router or switch.
  • Convert a wired PC to WiFi-ready: Connect the PC, through its LAN por,t to EW-7228APn.
  • Extend the WiFi signals coverage: Connect EW-7228APn to existing WiFi network or devices.
Download Area
 Datasheet  Quick Install Guide  Driver  FAQ
 Compatibility  Product Images  Manual  Firmware
 Linux Source Code  CE DoC