BR-6478AC Edimax BR-6478AC Dual-Band AC1200 Router / Extender / AP, 3-in-1 Smart Device, Provides Simultaneous 2.4GHz & 5GHz Frequency with Gigabit Ports for Faster Connectivity, Features iQ-Setup for Easy Installation via Smartphone/Tablet
Next generation 802.11ac Wi-Fi standard
Backward compatible with 802.11a/b/g/n standards
Concurrent dual-band wireless connectivity for 2.4GHz and 5GHz
5-port gigabit Ethernet connectivity
Revolutionary iQoS for efficient and effective internet bandwidth management
Overview
3-in-1 Router, Access Point and Range Extender
The BR-6478AC can work as Router, Access Point or Range Extender. Just configure the mode you need for your network environment using the smart iQ Setup wizard through your Smpart phones or Tablets.
Features iQ Setup for smart, automatic and quick installation with no CD required.
Check out the video below for Easy Installation Demo.
Next-Generation Wireless Networking The Edimax BR-6478AC router supports the next generation IEEE 802.11ac wireless standard, meaning higher data rates in the 5GHz band. With 300Mbps speeds in the 2.4GHz band and 867Mbps speeds in 5GHz, the BR-6478AC is ideal for HD video streaming and large file transfers. The router is also backward compatible with 802.11a/b/g/n to ensure compatibility with legacy Wi-Fi devices.
Concurrent Dual-Band Wi-Fi & Gigabit Ethernet Connectivity The Edimax BR-6478AC router provides simultaneous 2.4GHz (802.11n) and 5GHz (802.11ac) wireless network connectivity for maximum flexibility of use. Additionally, the BR-6478AC router features four gigabit LAN ports and one gigabit WAN port, offering data rates of up to a staggering 1000Mbps for users with the need for maximum network performance. With gigabit Ethernet connectivity, the BR-6478AC can provide users a fast and smooth media streaming or network gaming experience.
WPS (Wi-Fi Protected Setup) Button & Built-In WLAN On/Off Switch The Edimax BR-6478AC allows users to build secure connections with WPS enabled wireless devices simply by pressing the WPS button - there is no need for the hassle of complex set up and configuration procedures . And with the built-in WLAN on/off switch users can also easily switch on/off the wireless connection without logging into the user interface – an easy way to save electricity when it is not in use.
APPLICATION DIAGRAM
HARDWARE INTERFACE
Specifications
FUNCTIONS
OUTPUT POWER & SENSITIVITY GAIN (5.0 GHz)
OUTPUT POWER & SENSITIVITY GAIN (2.4 GHz)
Supports AP, AP client, AP bridge, WDS and range extender modes
Guest network
•Port triggering for special applications
IGMP proxy and IGMP snooping
Virtual server and DMZ hosting
MAC/IP filter and URL blocking
Static routing
UPnP architecture
VPN pass-through (IPSec/PPTP)
Schedule control
Output Power:
11a (54Mbps): 12±1.5dBm
11n (20MHz): 12±1.5dBm
11n (40MHz): 12±1.5dBm
11n (80Mhz): 10 ±1.5dBm
Receive Sensitivity
11a(54Mbps): -70±2dBm
11n(20MHz, MCS7): - 68±2dBm
11n(40MHz, MCS7): - 64±2dBm
11n(80MHz, MCS9): -54±2dBm
Output Power:
11b (11Mbps): 16 ±1.5dBm
11g (54Mbps): 14 ±1.5dBm
11n (20MHz): 13±1.5dBm
11n (40MHz): 13±1.5dBm
Receive Sensitivity
11b(11Mbps): -84±2dBm
11a(54Mbps): -70±2dBm
11n(20MHz, MCS7): - 65±2dBm
11n(40MHz, MCS7): - 63±2dBm
HARDWARE INTERFACE
WAN
MANAGEMENT
1 x RJ-45 gigabit WAN port
4 x RJ-45 gigabit LAN port
LED indicators: power, Internet, wireless, WAN LNK/ACT, LAN LNK/ACT
2 x 3dBi dual-band antennas
WPS/Reset button
Wireless on/off switch
Supports WISP connection mode
Supports RJ-45 cable/xDSL modems
WAN protocol: PPPoE, static IP, dynamic IP, PPTP and L2TP